Günstigste LHI Matek HUBOSD H PDB OSD BEC und 140A Current Sensor for FPV Multirotor Quadcopter das kannst du jetzt haben. Dieses produkt hat gute qualität und natürlich mit erschwinglichen preis können sie es haben.
Beschreibung:
You can query product authenticity on the official website
http://www.mateksys.com/
General:
Input voltage range (3S-5S operation): 8 - 21VDC
PDB: 4x30A (Max.4x35A)
Reglated 5V and 12V outputs
Current Sensor 140A
Built-in STOSD8
Physical:
- 2oz copper, 4-layers andamp;1.6mm PCB.
- 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.
- Camera signal andamp; Gnd pads, Video Transmitter Signal andamp; Gnd pads
- 1x Serial port (RX, TX, G)
- Dimensions: 46x36x4mm, Weight: 8.5g
- Mounting holes 30.5mm square spacing，Φ3mm
PDB(ESC outputs)
Continuous current: 30A per output
Peak current (10 seconds/minute): 35A per output
BEC 5V outputs
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V outputs
Linear regulator, very low noise. LC Filter is needless.
Designed for Video TX or FPV camera.
Voltage: 12.0 +/- 0.3VDC (4~5S operation)
Continuous current: 500mA16V IN, 400mA20V IN
Short-circuit tolerant (2 seconds/minute)
If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V
Current Sensor :140A, If current >140A. STOSD display 140A
Package Including
1 * HUBOSD Multifunctinal HUB with PDB BEC 5V 12V
Funktionen:
- A multifunctional HUB with PDB, BEC 5V/2A & 12V/500mA, Current sensor 140A, STOSD8. The BEC 12V is linear regulator, no LC Filter needed. Specially made for the mini FPV Quad.
- Built-in STOSD8 can support Plug & Play, no complicated settings needed. Features:Running indicator, Autodetect PALNTSC, Dynamic on screen info, Min.Volt Max.Amp recorder, Automatic flight timer, Auto battery cells detection, Low vlotage alarm, Exceeding mAh alarm,Firmware upgradable.
- 8 - 21V DC input voltage range(3S - 5S operation). PDB(ESC outputs): 4x30A (Max.4x35A). Regulated 5V and 12V. 140A current sensor.
- 2oz copper.4-layers 1.6mm PCB.Dimensions: 46x36x4mm.Weight: 8.5g.Mounting holes 30.5mm square spacing,Φ3mm.
- Physical: 1x Battery input,4x ESC outputs.2x BEC 5V outputs,2x BEC 12V outputs,Camera signal Gnd pads,Video Transmitter Signal Gnd pads,1x Serial port (RX, TX, G).
